SAINT-GOBAIN SEFPRO
Home SCIMOS Corporate Information
| Contact us | Site Map |  
Home > Scimos > Casting Technique
 
Casting Technique
 
 
DCL
DCL
Casting is performed with a large header in which most of the voids are concentrated. The header is subsequently cut off after cooling. The resultant block is dense and virtually void free. Recommended for Scimos CS5, Z, and A.
Semi DCL
Semi DCL
Casting method is the same as DCL. Most voids have been removed from the block.
RC (Regular Cast)
RC (Regular Cast)
While annealing is in progress, shrinkage voids of approximately 6% of total volume are formed under the casting gate. This block is generally used where such voids will not disrupt ordinary glass furnace operation.
Premium castings, separately proposed herein, are suggested for specific applications where the location of voids or their existence may create a problem.
SCIMOS
Alumina Series
SCIMOS M
SCIMOS H
SCIMOS A
AZS Series
SCIMOS CS-3
SCIMOS CS-4
SCIMOS CS-5
Zirconia Series
SCIMOS Z
SCIMOS CZ
SCIMOS UZ
Cement Series
HMS,S,ZA-RAM
Glass Furnace Application
Typical Physical Properties & Chemistry
Table
Graph
Production Sequence
Casting Technique
Terms of use
copyright(c) 2005 SAINT-GOBAIN TM K.K
JAPANESE